PRODUCTS

  AUTOCLAVE [PORTABLE]–VERTICAL [ SINGLE BODY ] :- MODEL : HIPL-001


Single body made of heavy gauge S.S. LM-304 grade buffed & polished to mirror finish, lid made of thick S.S. with argon-welded joints. Pressure upto 22 PSI factory set at 15 PSI. Complete with pressure gauge, safety valve, and steam release valve. Unit works on 230 V Ac, 50 Hz. Supply.


                                                 


AUTOCLAVE




 CHAMBER SIZE 

 VOLUME

 RATING WATTS
IN IN NCHES
IN CMS

21 Ltrs.  

1500                                        

12”Ø  x  12” Ht

30 Ø  x  30 Ht.

  OPTIONAL :

  Digital Temperature Indicating Controller with suitable sensor Factory set at 1210c [ 15 PSI ]
  Perforated Basket made of S.S. LM-304 grade




  AUTOCLAVE VERTICAL [ DOUBLE BODY ] :- MODEL : HIPL-001

• Double body, has single chamber for steam and water, covered externally by outer shell.
• Inner body made of heavy gauge Stainless Steel LM-304 grade with argon welded joints, outer    body made of S.S. LM-304 grade mirror finished.
• lid made of thick stainless steel, pressure upto 22 PSI factory set at 15 PSI.
• Complete with pressure gauge, safety valve, steam release valve, extra safety valve.
• Low water level cut-off assembly provided to eliminate heater burnouts.
• PRESSURE SWITCH for additional safety and Foot lifting arrangement included for size
  18” Dia. x 24” Ht. and above
• Perforated basket made of S.S. LM-304 grade included with the Unit.
• Electrically operated on 230 V AC, 50 Hz. Supply.



CHAMBER SIZE

VOLUME

RATING WATTS

IN INCHES      
  IN CMS

12”Ø x  20” Ht.

30 Ø  x  50 Ht.

35 Ltrs.

2000

14”Ø  x  22” Ht.

35 Ø  x  55 Ht.

52 Ltrs.

3000

18”Ø x  24” Ht.

45 Ø  x  60 Ht.

95 Ltrs.

4000

18”Ø x  30” Ht.

45 Ø  x  75 Ht.

125 Ltrs.

4000

22”Ø x  30” Ht.

55 Ø  x  75 Ht.

175 Ltrs.

6000

22”Ø x  36” Ht.

55 Ø  x  90 Ht.

200 Ltrs.

6000



   OPTIONAL :

   Digital Temperature Indicating Controller with suitable sensor Factory set at 121°c [ 15 PSI ]


 

  AUTOCLAVE STEAM STERILIZER – FULLY AUTOMATIC –
  VERTICAL[STANDARD   & GMP MODELS] :- HIPL-001B & 001 C

• Double body construction, single chamber for    steam and water, covered externally by
   outer shell.
• Lid made of thick stainless steel, pressure upto    22 PSI factory set at 15 PSI.
• Complete unit with automatic air purging, Digital    Temperature control & Indication with 0.1c    Accuracy/ Resolution, with electronic Digital timer    range 0 to 99 min.
• Autoclaving time cycle automatically starts when    set pressure is achieved.
• Automatic steam release once autoclaving cycle    complete.
• Complete with pressure gauge, safety valve,    steam release valve, extra safety valve.
• Incorporated with an Automatic Pressure Control    Switch as an additional safety device.
• Low Water level cut-off : Low water level cut-off    assembly connected to heater which    automatically cuts off power to heater if water    level is not sufficient thus eliminating heater    burn outs.
• Foot lifting arrangement included for Capacity    125 Ltr. and above. Not included/required for     lower sizes.
•  Provided with S.S. L-304 grade perforated    basket.
• Unit works on 230 V Ac, 50 Hz.
AUTOCLAVE STEAM STERILIZER



STANDARD MODEL  :    HIPL-001 B

Inner body made of heavy gauge Stainless Steel LM-304 grade with argon welded joints, outer body made of S.S. LM-304 grade mirror finished.

GMP MODEL  :    HIPL-001 C

Inner body made of heavy gauge Stainless Steel LM-316 grade with argon-welded joints, outer body made of SS LM-304 grade mirror finished

Provided with Validation Documents.


CHAMBER SIZE

VOLUME

RATING WATTS

IN INCHES 
IN CMS

12”Ø x  20” Ht.

30 Ø  x  50 Ht.

35 Ltrs.

2000

14”Ø  x  22” Ht.

35 Ø  x  55 Ht.

52 Ltrs.

3000

18”Ø x  24” Ht.

45 Ø  x  60 Ht.

95 Ltrs.

4000

18”Ø x  30” Ht.

45 Ø  x  75 Ht.

125 Ltrs.

4000

22”Ø x  30” Ht.

55 Ø  x  75 Ht.

175 Ltrs.

6000

22”Ø x  36” Ht.

55 Ø  x  90 Ht.

200 Ltrs.

6000

  OPTIONAL :

Digital Temperature Controller with 4 sensors with Printer Interface to Dot Matrix printer
(Without printer)

Portable Single Point Strip Chart Recorder with Retransmission output

Same as above but with PC Interface with software

 


 

 
AUTOCLAVE STEAM STERLISER – VERTICAL [TRIPLE BODY] :

MODEL : HIPL- 001 C

Triple drum, all three chambers made of S.S. LM-304 grade, maximum pressure upto 30 PSI operating pressure 15 to 22 PSI factory set at 15 PSI. Complete with pressure gauge, safety valve, steam release valve. Installed with water level gauge glass. Unit works on 230 V Ac, 50 Hz. Supply.

SIZE OF WORKING CHAMBER RATING VOLUME
[IN INCHES] [IN cms]  [watts]    [IN LTRS.]
12” dia x 14” Ht 30 dia x 35 ht cms  1500 24
12” dia x 20” Ht 30 dia x 50 ht cms 2000 35
16” dia x 24” Ht 40 dia x 60 ht cms 3000 75

OPTIONAL :

Digital Controller to control pressure/temp. with temperature display indication. Factory set for 121°c [15 PSI] alongwith built in digital timer adjustable for maintaining sterilization cycle time with auto cut-off by means of solenoid valve. Supplied with control panel and Mains On/Off Switch.
Back
• Autoclave Vertical • Autoclave Vertical Fully Automatic • Bacteriological Incubator
• Bacteriological Incubator - Memmert Type • B.O.D. Incubator • Cooling Incubator
• Stability Chamber • Waterbath Rectangular • Constant Temperature Bath • Viscosity Bath
• Digital Oil Bath - High Precision • Cryostat Bath • Deep Freezer - Vertical • Deep Freezer - Horizontal • Floculator • Muffle Furnace  • Laboratory Oven • Hot Air Oven - Memmert Type
• High Temperature Oven   • Tray Dryer  • Tray Dryer (Complete S.S. LM-304 Models) • Vacuum Oven - Round  • Vacuum Oven - Rectangular •  Rotary Shaker • Orbital Shaking Incubators - Without Refrigeration • Orbital Shaking Incubators - With    Refrigeration  • Waterbath Incubator Shaker  •  Laminar Air Flow - Vertical   •  Laminar Air Flow - Horizontal

| Designed & Hosted by : MID |  Promoted by : GID |