PRODUCTS

B.O.D. INCUBATOR [ STANDARD & GMP MODEL ] :- HIPL-003 & 003 A

• Double walled in construction, gap between the two walls filled with high quality Polyeurethene    Foam (PUF)
• Full length inner acrylic door with and outside metal door with solid S.S. lock & key.
• Food Grade Silicon Gasket fitted on the Chamber and Magnetic Gasket fitted on outer metal door    ensures zero leakage between the door & the Chamber.
• Provided with forced air circulation for uniform temperature within the chamber.
• Hermetically sealed Emerson Make Compressor unit utilizing R-134A an eco-friendly refrigerant    with electronic time relay to safeguard the Compressor.
• Castor wheels for easy moveability. Provided with Validation Port.
• Additional high temperature safety system to cut-off all heaters ensuring temperature within    chamber doesn’t exceed +70c also incorporated in the Unit.
• Electrically operated on 230 V Ac, 50 Hz. Supply.
 

TEMPERATURE RANGE  :  +5 0c to +60 0c
TEMP ACCURACY   :  ±  0.5 0c          
TEMP. UNIFORMITY  :  ±  0.5°c                                                                    



 

STANDARD MODEL  :    HIPL-003

Outer chamber made of Mild Steel [ 20 swg.] duly powder coated and inner chamber made of Stainless Steel LM-304 grade [ 20 swg.] Mirror finish.

Microprocessor based AUTO-TUNING PID Digital Temperature Indicating Controller, Resolution 0.1°c with suitable sensor. In the event of power failure, Non-Volatile memory allows chamber to return to original set point when power is restored.

Thermostatic High Temperature Safety cut off provided.

Rod type Shelves provided are made of Stainless Steel

B.O.D. INCUBATOR

GMP MODEL  :    HIPL-003 A

Outer chamber made of Stainless Steel LM – 304 grade [ 20 swg.] and inner chamber made of Stainless Steel [ 20 swg.] Mirror finish.

Microprocessor based AUTO-TUNING PID Digital Temperature Indicating Controller, Resolution 0.1°c with suitable sensor. In the event of power failure, Non-Volatile memory allows chamber to return to original set point when power is restored.

DIGITAL High Temperature Safety cut off provided.

Rod type Shelves provided are made of Stainless Steel

Provided with Validation Documents.

 
B.O.D. INCUBATOR

CAPACITY

INTERNAL
DIMENSION
W  X D  X H 
[cms]

EXTERNAL DIMENSION
W   X  D  X  H [cms]

SHELVES

3 Cu.Ft.   [ 90Ltrs]

45 x 45 x 45

64 x 92 x 125

02

4 Cu.Ft.  [120 Ltrs]

45 x 45 x 60

64 X 92 X 140

02

6 Cu.Ft.  [165 Ltrs]

50 x 50 x 70

69 X 97 X 150

02

10 Cu.Ft.  [ 280 Ltrs]            

55 x 55 x 90

74 X 102 X 170

03

12 Cu.Ft.  [ 324 Ltrs]

60 x 60 x 90

79 X 107 X 170

03

16 Cu.Ft.  [ 440 Ltrs]

60 x 60 x 125

79 X 107 X 205

04

29 Cu.Ft.  [ 800 Ltrs]

80 x 80 x 125

99 X 127 X 205

05




  OPTIONAL :

DIGITAL High Temperature Safety cut off in lieu of Thermostatic High Temperature Safety cut off (For STANDARD Models Only)

Microprocessor based PROGRAMMABLE PID Controller cum Indicator with Printer Interface to connect Dot Matrix Printer. Print interval programme can print Date, Time & Temperature with print interval settable between 1 to 99 minutes [ without Printer ]

Same as above but with PC software & connectivity.
• Autoclave Vertical • Autoclave Vertical Fully Automatic • Bacteriological Incubator
• Bacteriological Incubator - Memmert Type • B.O.D. Incubator • Cooling Incubator
• Stability Chamber • Waterbath Rectangular • Constant Temperature Bath • Viscosity Bath
• Digital Oil Bath - High Precision • Cryostat Bath • Deep Freezer - Vertical • Deep Freezer - Horizontal • Floculator • Muffle Furnace  • Laboratory Oven • Hot Air Oven - Memmert Type
• High Temperature Oven   • Tray Dryer  • Tray Dryer (Complete S.S. LM-304 Models) • Vacuum Oven - Round  • Vacuum Oven - Rectangular •  Rotary Shaker • Orbital Shaking Incubators - Without Refrigeration • Orbital Shaking Incubators - With    Refrigeration  • Waterbath Incubator Shaker  •  Laminar Air Flow - Vertical   •  Laminar Air Flow - Horizontal



 

Designed & Hosted by : MID   Promoted by : GID